UNION Charger Bindings

UNION Charger Bindings

Quick and easy transitions at the touch of a lever. The Union Charger splitboard binding has quickly become a favorite of splitboarders and snowboarders worldwide. Durable, easy to use and offering the best riding feel of any binding available on the market today. Switch to Union splitboard bindings and enjoy the ride. Binding includes: mounting hardware, pair of Charger split discs with magnesium adapter plates, pair of Charger quiver discs (allows mounting on normal board) with magnesium adapter plates, touring brackets and splitboard strap.

Instructions for use

Split Disque Charger

With zero space for a pin in the center of the disc, Charger's split-disc connection is now stronger than ever. A small notch in the rear disc allows Charger's easy-to-use lever to lock you in place.

Step 1

Pull the lever up into the rear baseplate and position the baseplate on the disc at a 90* angle, the lever should be aligned with the two reference points on the disc. Push the base plate down onto the disc.

Step 2

Turn the base plate counter-clockwise until it stops. Rotating the fasteners will help pull the two halves of the splitboard together, allowing the best possible splitboard connection.

Step 3

Push the lever down to lock the binding in place. You're now ready to strap on and enjoy the ride.

Charger Touring bracket

No more need for pins. The Charger Touring Bracket is the future of Union Binding splitboard technology. Simple, easy to use and incredibly light.

Step 1

Turn the base plate vertically and align it with the pins on the bracket.

Step 2

Slide the base plate inwards until you feel it stop. Make sure you push the base plate all the way in before pushing it in. The baseplate will only release at a 90° angle*.

Step 3

You're now ready to set off on your ride. To help you on steep climbs, tip the heel elevator under the base plate and lock it firmly in place.

Size Guide