SUP STARBOARD Sprint Wood Carbon 14'0'' x 25.5''

A thin, sharp nose separates water effectively and prevents water from wrapping around the nose to slow you down. It comes out faster in chop and gives you more control over the swell.

The tail has a new rounded tail edge, giving a smoother release and more efficient glide. In rough conditions, the new round nose is more forgiving.

The inner rails are deeper in the standing area to utilize the full width inside the cockpit and improve stability.

Optimized for maximum speed on flat water.
Less drag, more efficiency.
The tail profile allows for more performance in the troughs.

Limits water splashing in the deck area and ensures even volume distribution throughout the board.

Our fastest and most efficient hull design ever.
The lowered apex combined with rounded rails makes gliding more efficient by reducing friction with the water and therefore drag.

For comfort and stability. The flat deck allows for free movement when setting up the board and surfing on the tail.

The rails are more tucked inward with a lower apex for more buoyancy, with the upper part of the rail curved inward to improve water flow over that part. A consequence of these curved rails is a reduction of water friction on the rail and therefore a longer glide after the last paddle stroke.

The deck closes off the back of the cockpit by moving up the back of the board. This prevents water from entering the cockpit during turns at the buoy and in the surf, while favoring relaunching and accelerating out of the turns.

The 3k prepreg biax carbon is an ultra light weave and creates a very high stiffness throughout the fin. The trailing edge features a super clean 0.4mm for clean hydrodynamics. The new fin range adds speed and performance like never before.

*Flash replaces Natural Winner

*Flash+ replaces Race Ultra

This allows you to position your carrying handles as you wish, especially for beach departures.

Helps deflect water entering the cockpit, keeping the weight of the water off the board. Also helps as a protective layer when attaching the board to the roof rails.

*The baffle will not be installed on the boards but shipped in the accessory box.

We moved the rail drainage to the center of the board, which resulted in :

Less water weight on the rails, reducing the water that caused imbalances in lateral stability.
Faster drainage, we have recorded up to 50% faster drainage time.
50% reduction in weight change from 4 to 2 drain holes
The standing area is much drier overall because less water penetrates when you lean to turn on the rail.

Recessed into the board for maximum efficiency, secured with improved sealing adhesive and additional clear tape around the edge.